Sheet Metal Fabrication in South Florida

The metal that finishes the roof - built under our own roof

On a commercial roof, the watertight details live in the metal: the flashing at every penetration, the copings that cap a parapet, the edge metal that takes the brunt of South Florida sun and storm. Campany Roofing fabricates that metal in-house rather than waiting on an outside shop - so every piece is cut to your building's exact measurements and ready when the crew needs it. It is the same standard of detail that has carried our commercial, condo and HOA roofing work across South Florida for more than 35 years.

• Fabricated to spec - profiles bent to your roof's real dimensions, not pulled off a shelf.
• On your timeline - in-house production keeps tight South Florida project schedules from slipping.
• One accountable team - the same company that designs, fabricates and installs stands behind the result.

Custom metal for every detail of the roof

From the everyday flashing that stops a leak to architectural metal that defines a building's roofline, our shop produces the full range of components a commercial reroof demands.

Flashing & Counterflashing

Custom-bent flashing at walls, curbs, pipes and every roof penetration - the first line of defense against water intrusion.

Copings & Parapet Caps

Continuous metal caps that protect parapet walls and crown the roof edge with a clean, durable, weather-sealed finish.

Drip Edge & Gravel Stop

Precision edge metal that directs runoff away from the building and locks the perimeter of the roof system in place.

Scuppers & Conductor Heads

Fabricated drainage outlets and collector boxes that move water off flat and low-slope roofs before it ever ponds.

Architectural & Trim Metal

Fascia, mansard panels and custom profiles that match the architecture and give the roofline its finished look.

Custom Profiles to Order

Non-standard bends, transitions and one-off pieces fabricated from your drawings or field measurements - no detail too specific.

Materials chosen to outlast South Florida weather

Salt air, relentless sun and hurricane-season wind are hard on roof metal. We fabricate in materials and finishes specified to hold up to all of it for condos, HOAs, general contractors and commercial properties across the eight counties in our South Florida service area. The right metal for a given detail depends on its exposure, the building's drainage and the look the architecture calls for:

• Aluminum - naturally corrosion-resistant, the go-to for coastal edge metal, copings and trim that face direct salt air.
• Galvanized & galvalume steel - high-strength flashing and structural details where rigidity and long-term durability matter.
• Premium architectural metals - long-life profiles for fascia, mansards and feature rooflines that have to look right for decades.
• Factory color finishes - baked-on coatings engineered to resist fading, chalking and the heat load of intense Florida sun.

Because the same crew that fabricates the metal also installs your full roof system, the flashing, edge metal and trim are detailed to work with the membrane or tile - not bolted on as an afterthought. Need a specific profile fabricated, or planning a reroof that depends on it? Contact our West Palm Beach shop and we'll quote it from your drawings or a field measure.